Radium Engineering Nissan S13/S14/S15/R32/R33/R34 Fuel / Brake Line Retainer Kit
$269.95
$256.99
RAD20-0626
Fabrication
Hoses
Set of brackets to retain fuel lines and brake lines on underside of Nissan vehicles including S13, S14, R32, R33, R34 and more. Billet...
Radium Engineering 10AN Male Swivel Banjo 17.5mm Press Fit
$59.95
$56.99
RAD20-0609
Fabrication
Fittings
Press in fitting that swivels after installation. 10AN male. Made for 17.5mm hole.
Radium Dry Break Dust Cap
$39.95
$37.99
RAD20-0604
Fabrication
Filler Necks
For use with Radium dry-break fuel cell fill receivers. Includes lanyard
Radium Fuel Fill Neck Hose Kit 1.5in Clear
$49.95
$47.99
RAD20-0602
Fabrication
Filler Necks
Clear fuel filler hose. 36" length. 1.5" ID. Clamps included.
Radium Engineering 3/8in SAE Female to 6AN Male Low Profile Elbow
$29.95
$28.99
RAD20-0601
Fabrication
Fittings
Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.
Radium Engineering 5/16in SAE Female to 6AN Male Low Profile Elbow
$29.95
$28.99
RAD20-0600
Fabrication
Fittings
Low profile adapter for SAE quick-connect lines. 90 degree elbow, converts to 6AN male. Compatible with all fuel types.
Radium Engineering Fuel Fill Neck Hose Kit - 1.5in ID
$89.95
$85.99
RAD20-0597
Fabrication
Filler Necks
Flexible fuel filler hose. 3 foot long, 1.5" inside diameter. T-bolt clamps included.
Radium Engineering 10AN ORB to .75in Barb Roll Over Valve
$24.95
$23.99
RAD20-0594
Fabrication
Fittings
Catch can fitting with integrated steel ball. This valve closes when inverted to prevent oil loss out of the fitting in case of an...
Radium Engineering Fuel Cap Remote Mount Vented
$39.95
$37.99
RAD20-0548-V
Fabrication
Fuel Lines
Replacement fuel cap only. For use with Radium fender mounted fill flange. Includes O-ring.
Radium Engineering Universal Check Valve Kit 10AN
$59.95
$56.99
RAD20-0534-10
Fabrication
Fittings
Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.
Radium Engineering Universal Check Valve Kit 8AN
$59.95
$56.99
RAD20-0534-08
Fabrication
Fittings
Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.
Radium Engineering Universal Check Valve Kit 6AN
$59.95
$56.99
RAD20-0534-06
Fabrication
Fittings
Universal in-line check valve with adapter fittings. Can be set up for a variety of hose -AN sizes. Compatible with all fluids.
Radium Engineering Universal Check Valve
$49.95
$47.99
RAD20-0534
Fabrication
Fittings
Universal in-line check valve. Female 8AN ORB inlet, male 10AN flare outlet. Compatible with all fluids.
Radium Remote Mount Fill Neck - Straight - 1.5in Barb
$79.95
$75.99
RAD20-0527
Fabrication
Filler Necks
Straight fill neck for 1.5" ID fill hose. 6-bolt flange. For use on Radium Fuel Cell Surge Tank systems. Integrated check valve flapper. Not...
Radium Engineering 08-21 Subaru Fuel Line Retaining Kit
$99.95
$94.99
RAD20-0526
Brackets
Fabrication
Bolts to underside of car to support aftermarket fuel lines. Same as brackets used in Radium fuel plumbing kit 20-0529-0X.
Radium Engineering 10AN Male Swivel Banjo - 11.8MM Press Fit Fitting
$59.95
$56.99
RAD20-0509
Fabrication
Fittings
Press fit swiveling low profile -AN adapter. Commonly used in valve covers. Stainless steel body with anodized aluminum swiveling -10AN male fitting.
Radium Engineering Acorn Nuts - Anodized Aluminum - 15PK
$19.95
$18.99
RAD20-0506
Fabrication
Fittings
Pack of 15 aluminum acorn nuts. 10-32 thread. Non conductive. For use with Radium electrical studs.
Radium Engineering 12AN Female Fitting to Air Filter
$44.95
$42.99
RAD20-0485
Fabrication
Fittings
Radium Engineering 12AN Female Fitting to Air Filter
Radium Engineering Fuel Cell Vent Kit - 12AN
$59.95
$56.99
RAD20-0484-12
Fabrication
Fuel Lines
INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering Fuel Cell Vent Kit - 8AN
$59.95
$56.99
RAD20-0484-08
Fabrication
Fuel Lines
INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Mitsubishi EVO X Fuel Tank Pressure Plug
$19.95
$18.99
RAD20-0421
Fabrication
Fittings
For use with the Radium Engineeing Evo X fuel pump hanger. This small part plugs the hole for the fuel tank pressure sensor. In...
Radium Engineering Hose Separator Clamp - 2 Way
$14.99
RAD20-0417
Clamps
Fabrication
CNC machined aluminum. For 0.39 diameter tube. M6 screw included.
Radium Engineering Submersible PTFE Fuel Tubing 3/8in 6.5in Long
$19.95
$18.99
RAD20-0395
Fabrication
Hoses
Radium Engineering Submersible PTFE Fuel Tubing 3/8in 6.5in Long
Radium Engineering Fuel Pressure Test Kit
$29.95
$28.99
RAD20-0392
Fabrication
Fittings
Line and fittings for remote mounting a pressure gauge or pressure transducer. 1/8NPT compatible. Gauge sold separately.
Radium Engineering Submersible PTFE Fuel Tubing 5/16in x 6.5in Long
$19.95
$18.99
RAD20-0375
Fabrication
Hoses
Radium Engineering Submersible PTFE Fuel Tubing 5/16in x 6.5in Long
Radium Engineering Filler Neck Block-Off Kit
$34.95
$33.99
RAD20-0360
Fabrication
Filler Necks
Radium Engineering Filler Neck Block-Off Kit
Radium Engineering 3/8in SAE Female to 6AN Male Low Profile Fitting
$24.95
$23.99
RAD20-0291
Fabrication
Fittings
Radium Engineering 3/8in SAE Female to 6AN Male Low Profile Fitting
Radium Engineering 5/16in SAE Female to 6AN Male Low Profile
$24.95
$23.99
RAD20-0290
Fabrication
Fittings
Radium Engineering 5/16in SAE Female to 6AN Male Low Profile
Radium Engineering Fuel Cell Weld Flange 24-Bolt Aluminum
$89.95
$85.99
RAD20-0278
Fabrication
Flanges
Radium Engineering Fuel Cell Weld Flange 24-Bolt Aluminum
Radium Engineering 3 Into 1 Distribution Block w/ Fittings
$89.95
$85.99
RAD20-0237
Fabrication
Fittings
Radium Engineering 3 Into 1 Distribution Block w/ Fittings
Radium Engineering 2-Piece Fuel Pump Clamp 60mm - Black W/ Logo
$49.95
$47.99
RAD20-0218
Clamps
Fabrication
Radium Engineering 2-Piece Fuel Pump Clamp 60mm - Black W/ Logo
Radium FPD-R Inline Barb Fitting
$119.95
$113.99
RAD20-0199-01
Fabrication
Fittings
Fuel pulse damper that can be used in-line with a fuel hose. Comes with adapter for 5/16 hose-barb connections
Radium Engineering Submersible PTFE Fuel Tubing 3/8in 12.8in Long
$19.95
$18.99
RAD20-0195
Fabrication
Hoses
Radium Engineering Submersible PTFE Fuel Tubing 3/8in 12.8in Long
Radium Engineering Venturi Jet Pump Kit
$89.95
$85.99
RAD20-0180
Fabrication
Fittings
INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering Submersible PTFE Fuel Tubing 5/16in x 12.8in Long
$19.95
$18.99
RAD20-0175
Fabrication
Hoses
Radium Engineering Submersible PTFE Fuel Tubing 5/16in x 12.8in Long
Radium Engineering 5/16in Barb to 6AN Bulkhead Fitting
$19.95
$18.99
RAD20-0170
Fabrication
Fittings
Requires a 9/16-18 threaded hole with chamfer to be drilled into the mating part for sealing. Barb is 8.5mm